Surprising difference between the Wi-Fi relay machine that directly inserts outlet!What is the best buffalo "WEX-1800AX4" for Japanese houses?

The connection destination SSID is OK with you, and it is easy to choose a bandwidth manually

The setting is easy.

Isn't it difficult to set a relay machine?You may be worried, but this relay machine is not the case at all.

Specifically, you only need to use the button settings to connect the access points you are using now.

With this, the existing SSID and password are inherited from the access points used so far, so you can expand the Wi-Fi area as it is without re-connecting PCs or smartphones.

The use while moving is smooth, for example, the access point that will be the main unit on the 1st floor, if a relay machine is installed on the 3rd floor, even if you move from 1F to 3rd floor, the communication will not be interrupted, and will be relayed from the parent unit seamlessly.The connection destination is changed to the machine.

These points can be said to have a mesh -like simplicity, despite being a relay machine.

Of course, unlike a mesh, which has no room for user intervention by automatic setting, it also has a high degree of freedom of settings unique to a relay machine.

Specifically, in addition to the SSID of the master unit automatically inherited, 2 as standard."Extender-G-XXXX" for 4GHz band and "Extender-A-XXXX" (and "Extender-G-XXXX-WPA3" and "Extender-A-XXXX-WPA3").SSID for the bandwidth can also be used at the same time.

In other words, 2 devices that do not require much speed.For equipment that wants to get a high speed to the 4GHz band, the connection destination can be manually selected and used, such as the 5GHz band.

It is a great attraction that you can keep using it with the SSID of the master unit without being conscious, or if you want to separate the devices connected for each band, you can use SSID properly.is.

The author's house has greatly benefited from this function, but it is easy to switch the bands used for relay on the side of the main unit with a switch.

According to the standard, the bandwidth for relay connecting the base unit and the relay machine is 2..The better radio wave condition of the 4GHz band and the 5GHz band is automatically selected.

However, my house was like that, but 2.In cases where the 4GHz band is easier to reach far away, it is often used in surrounding houses, and the speed may decrease extremely due to congestion 2 to the relay..If the 4GHz band is used, the overall speed may decrease.

For this reason, I would like to use the 5GHz band for relay, but in general relay machines, the settings of these relay bands are complicated, and most of them must be accessed from the detailed setting screen. was.

With this product, such a hassle can only be switched.

If you switch the switch on the side of the main unit from "Auto" to "5GHz", you can switch the relay band to the 5GHz band.

In short, this product is a relay machine that can be easily set to the user's environment.

You can use it without thinking about anything, or if you can choose SSID or relay bandwidth according to your environment, it is a product with a high degree of freedom.