Storymer YUNOCY's distribution environment remodeling plan.High -image quality techniques on the setting side, etc.

Equipment setting

First, the camera setting.For shooting settings, in the manual exposure mode of the video, the sensitivity is ISO100, the shutter speed is 1/120 seconds, and the F value is 1..4. Change the white balance to 5500k, the recording method is XAVC S HD, the recording setting is 60p 50m, the HDMI resolution is 1080p, the 24P/60p output switching is 60p, the HDMI information display is turned off.

My own environment is a 24P output and a movie -like finish, including the color, but if you don't have that kind of aim, you can use a full HD/60P like this time.At the same time, the shutter speed is set to 1/120 to give a moderate afterimage feeling.

Originally, a web camera was attached to the secondary li -is play, but there was something like a background object on the right side of Yunocy's seat, so I decided to put it on the screen after the renewal.The camera was set in almost the same position.

The center material of the wipe is the distributor's face, but while continuing to deliver, it becomes one identity, including the background.In the case of Yunocy, in addition to the background objects mentioned above, the identity was already established, such as illuminating the back wall with RGB LED light, so this time we did not particularly work.

The lighting is installed diagonally in front of the opposite side of the camera using the arm.The distance is about 5-60 cm from the face, and in this state the light amount is about 20%.In fact, this time, another lighting was installed on the camera side, and I was thinking of suppressing the shadow a little, but the preparation was not in time and it was one lighting configuration.If you are aiming for an environment similar to this article, you can use a cheaper sub -lighting of several thousand yen, referring to the past articles below, can be slightly illuminated.

The capture unit is connected to the camera with an HDMI-Micro HDMI cable and the USB terminal is connected to the PC.The main unit can be inserted directly into the PC, but it comes with a USB extension cable of about 10cm, so it is easier to use it.Connected USB 3.Any port of 0 or more is fine, but the capture unit is not frequently inserted and inserted, so if you insert it on the back if you put it on the back of the mouse computer "G-Tune HP-Z" used by yunotic. All right.